车价发出的颤音
——摘自搜狐网(http://auto.sohu.com)
降价——没完没了老话题
去年至今年以来车坛的热门话题始终围绕着汽车降价转动，稍有动静就会掀起起一阵波澜，搞得汽车厂商纷纷指责传媒不负责任劲吹阵阵“降调”，透支了消费者的期待值，使其捂紧钱袋在左顾右盼车价的“跳楼”；而传媒则抨击厂商宁可闲置产能也不肯薄利多销加惠于民。双方各执一词引得众多的潜在消费者作壁上观，耳听着中国“入世”的风声渐近。有些机灵的“支流”厂家投石问路先开点降价的小闸，随即冲开众多厂家垒起的价格堤坝上的豁口，以致“主流”厂家信誓旦旦发咒“决不降价”和“没有降价余地”的话音刚落，就被裹挟到一片降价潮中，尽管只是从价格的高堤上冲刮掉了薄层。出于厂家对降价说法的本能反感，仍玩起了诸如“季节性调价”、“限时促销”和“优惠促销”之类文字游戏。确有个别的“光脚”厂商拿出了杀手锏，已将全国最低的4万多元的轿车价扎猛子沉降到了3.78万元，让众多厂商侧目而视看成害群之马。
要看到尽管传媒“为民请命”在大肆激励厂商来打价格战（即大幅度地降价），甚至都超前主动替厂商搭好了“跳楼平台”，众多观望的潜在消费者也一直翘盼能在价格战中获得“战利品”，而不屑看到厂商万把元的让利或香车搭电脑之类的“作秀”。但是最终“价格战”只闻号响不见真影。对于这些盘居市场多年、车老色衰而年年补点浓妆的中档主流车型，为什么现阶段价格战打不起来？该不该打价格战？厂商倒底有无有能力来打价格战？一直众说纷纭。但无庸置疑，只要有大批想圆汽车梦的消费者在居高不下的车价下徘徊，车价就会成为标靶，降价就会成为喋喋不休的话题。
购车——观望等待费心机
更多-> |
|
返回
|
- The removal and replacement
of a clutch assembly can be completed while the
engine is in or out of the car. The clutch
assembly is mounted to the flywheel that is
mounted to the rear of the crankshaft.
- Before disassembling the
clutch, make sure alignment marks are present on
the pressure plate and flywheel.
- The attaching bolts should
be loosened before removing any of the bolts.
With the bolts loosened, support the assembly
with one hand while using the other to remove
the bolts. The clutch disc will be free to fall
as the pressure plate is separated from the
flywheel. Keep it intact with the pressure
plate.
- The surface of the pressure
plate should be inspected for signs of burning,
warpage, and cracks. Any faults normally
indicate that the plate should be replaced.
- The surface of the flywheel
should also be carefully inspected. Normally the
flywheel surface can be resurfaced to remove any
defects. The pilot bushings or bearing should
also be inspected.
- Insert the new clutch disc
into the pressure plate as the pressure plate is
moved to its proper location. Make sure the disc
is facing the correct direction. Most are marked
to indicate which side should be seated against
the flywheel surface.
- Install the pressure plate
according to the alignment marks made during
disassembly.
- Install the attaching
bolts, but do not tighten. Then install the
clutch alignment tool through the hub of the
disc and the pilot bearing. This will center the
disc on the flywheel.
- With the disc aligned,
tighten the attaching bolts according to the
procedures outlined in the service manual.
|
|
|
|
| 相关零件: |
 |
|
|
|
|
|
返回顶部.
|
|
|
|
