自己动手养护汽车步骤
油漆层的保养
汽车车身经过碰撞，车身钢板折皱，漆面层就容易被破坏，钢板外露，易生锈，必须马上修复、补漆。油漆层与金属不同，硬度很低，很容易被损伤，因此，在清洗或打磨时一定要用柔软的麂皮、棉布或羊毛刷等，否则，反而会刮出划痕，弄巧成拙。
更多-> |
|
返回
|
|
To remove the sensor:
- Disconnect the wiring
harness.
- Unbolt the sensor mounting
bolt.
If the crankshaft timing
sensor or the camshaft reference sensor is removed,
follow this procedure when the sensor is replaced:
- Thoroughly clean the sensor
tip and install a new spacer on the sensor tip.
New sensors should be supplied with the spacer
installed.
Spacer on crankshaft timing
sensor and camshaft position sensor.
- Install the sensor until
the spacer lightly touches the sensor ring, and
tighten the sensor mounting bolt 105 in.lb.
|
|
|
|
返回顶部.
|
|
|
|
